Ninja Blender Power Light Blinking Red? Try these Easy Fixes!

A blender is a useful kitchen appliance that can be utilized to prepare different dishes. Blenders come in a wide variety of models, from basic hand-held gadgets to robust industrial-level machines. Ninja blenders are among the most effective and efficient cooking utensils.

To let the Ninja blender, operate effectively, the lid must be positioned correctly to get better control. A small white indicator can be seen on the cover of your Ninja blender if you see it on one side. Why is my Ninja blender power light blinking red? If the cover is not correctly placed with the grip, your Ninja blender will illuminate red.

How can you fix this issue and what are its other causes? Let’s explore it.

Why is my Ninja Blender power light blinking red

Why is my Ninja Blender power light blinking red?

When you try to switch on your Ninja blender but it does not operate, the Ninja start button will illuminate. This indicates that something requires your attention. Why does the red light blink on my Ninja power button?

The quick response is that the blender needs to be on its bottom and with the lid sealed. The power button will blink if the blender is not firmly placed on its foundation. Also, it will blink if the lid is not completely closed.

There will be a simple fix if your Ninja blender’s light starts to glow and then starts to show signs of danger. You will have to follow some instructions to determine and fix the issue of the red-light blinking.

Read this article to solve ninja blender leaking from bottom problem.

How to fix the Ninja Blender Red Light Blinking?

How to fix the Ninja Blender Red Light Blinking

The cover of the Ninja blender will work as a warning. It indicates that the central structure has to be adjusted because it isn’t properly connected to the handle. Instead of pressing the power switch when these alerts display, it starts flickering red light.

But you should not need to worry due to this due to the following reasons:

  1. You must check for misalignment, both indicators on the cover and handles must be set in the right places. When you push the power button on your Ninja blender, the power indicator will blink if they aren’t in the right place.

Another situation is when the cover looks to be closed but isn’t fully closed on the blender. In this situation, you will have to lower the lid’s grip to ensure it is closed. Once you have completed it, you will have to go back and ensure that processes 1 and 2 are accurate.

It is another common mistake to put an incorrectly fastened container on the blender’s base. You can do this mistake when trying to cook special meals for your family members.

  1. The most important symptom is that your pitcher rotates easily when you push it in and is securely attached in all four directions. Your ninja blender might not activate or flash its power indicator if you don’t do this accurately. So, you must attach the container or pitcher accurately to the blender.
  1. You should fix your Ninja blender to the bottom in a similar way to how you did by using the container. It must be oriented backward and the blender will have to connect it properly. You will have to set the container’s front on top or close to the blender’s bottom side.

Read our article if your ninja blender is smoking.

Is your Ninja Blender Still Flickering?

There are situations when you can’t switch off the power button flickering after following all the suggested instructions. The recommended path of action in this condition is to disconnect your Ninja blender from its power supply for 10 minutes. After that, you will have to reattach it.

Your machine requires maintenance if the power indicator is still flickering. If this situation occurs, you must get in contact with the company where you bought it or contact client support instantly.

The blender might be broken, in which case you will have to get a new blender. This could also cause the red light to blink. It could be triggered by a defective electrical cord, which would require expert help to repair the issue.

Another option is that the blender’s internal rotor was misused or destroyed due to being dumped. You must assess the plastic pieces of your Ninja blender for fractures if it has fallen. It is because these could be dangerous and cause injuries if utilized again.

Even if you haven’t made any mistakes then your Ninja blender’s power light will not be working accurately. It can happen due to an electrical malfunction within the machine.

It also indicates that you shouldn’t do anything else and call customer support. You will have to discuss what went wrong with your Ninja blender. In this way, they will help you figure out the issue and its solution.

Do Ninja Blenders have a fuse?

Do Ninja Blenders have a fuse

Ninja fuse-equipped blenders have an inbuilt fuse inside them. If there are any issues, you must check the fuse of the blender. To start, you will have to verify if the bulb has blown accurately.

The power cord cannot deliver current to the blender when it is put into an adapter due to a damaged fuse. You can utilize a multimeter to verify the functionality of the fuse.

Food mixers and blenders simplify the procedure of making meals by giving you the ingredients you need in the appropriate consistency. But if you utilize your favored blender a lot, you can get problems like a power cut or a rotating that is blocked.

What can be the fixes?

If a blender isn’t operating and isn’t spinning at all, it is dead. Sometimes the hiding issue is a defective circuit when your blender doesn’t blend or spin at all. You must check the power cord’s connections for fuses. For this. you can utilize a multimeter to assess the power.

Moreover, you will have to replace the defective fuse with a new one of the same type. But you will use a higher wattage if you detect a high signal.

If the fuse is broken, you can either purchase a new one from a retailer or online from the product’s manufacturer. You should check it once again after replacing the fuse and tightening the lid.

How can I take care of my Ninja Blender?

  • It is important to be familiar with a new and practical device that you will have to use regularly in your kitchen such as a Ninja blender. The most essential thing is a short handbook that contains all installation directions, operating advices, and minor details that come with the blender.
  • You must spend your time carefully studying the directions. Apart from that, you can get help assembling it and make sure you stick to the directions.
  • Once everything is assembled, you must attach the power wire, motor, and rotors before plugging it into an electrical outlet.
  • Ninja covers have a square “release” key that must be pushed to open and detach the cover. After that, you can put everything in the blender. You must ensure to remove and slice all of the items you are adding within the blender.
  • To choose the options correctly, you must align the indicators on the grip and cover as instructed. Then you will have to lock the top to avoid spillage.
  • You should choose the pulsing setting or use different speed knobs if you need to slice or use a grinding phase.
  • If you will keep the power switch depressed for three seconds, it will start the mixing procedure in your Ninja blender.


This smart blog post contains all the information regarding the Ninja blender power light blinking red. You must be aware of all the reasons why red-light blinks in the blender. After detecting the issue, you can fix the issue.

I have explained all the solutions to fix the problems with the blender. But you must follow all the instructions carefully without doing any mistakes. Thus, the common issue can be not fixing the cover of the blender accurately.

Was this information effective? Share your comments!

Frequently Asked Questions

Simple to say, if one or several of the parts of your Ninja blender are incorrectly placed, the power button will flicker. So, you must make sure the container and cover are positioned correctly and everything is securely placed. Also, you must make sure the cover lock is fully pulled down as well.

First, you must make sure your Ninja blender is connected to a power outlet. You haven’t placed the blender components properly if the blender won’t rotate and the Power indicator is blinking. So, the blender will stop rotating and protect you from any injury.

No, there is no specific reset button on your Ninja blender. Similar to several of the other cooking equipment, your blender cannot be reset by tapping a specific combination of buttons.

Mery kitchen aims

Mery Webber

Mery Webber, the founder of Kitchen Aims, is a passionate home cook with extensive experience in the kitchen appliance industry. Through her blog, she aims to share her knowledge and help readers create the perfect kitchen.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *